designed & dimensioned in millimeters[inches] this product manufactured with lead-free processing pb do not scale from this print -p: plug mcx7-p-c-xx-st-ca3 -ca3: cable (rg179) orientation -st: straight termination gender type -c: cable plating specification -hn: heavy gold/nickel (see note 7 & 8) (sub-mcx7-p-c-fn-st-ca3) (MCX7-P-C-H-ST-CA3-pin) (mcx-fer-001-n) -h: heavy gold (see note 7 & 8) (sub-mcx7-p-c-f-st-ca3) (MCX7-P-C-H-ST-CA3-pin) (mcx-fer-001-f) mcx-fer-001-x sub-mcx7-p-c-xx-st-ca3 mcx7-p-c-x-st-ca3-pin fig. 1 mcx7-p-c-xx-st-ca3 shown 2.0 .079 3.9 .154 9.1 .358 recommended cable stripping c sheet of unless otherwise specified, dimensions are in millimeters [inches]. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: mcx straight cable plug, rg179- 75 ohm by: mcx7-p-c-xx-st-ca3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 02/06/2008 3 1 sheet scale: 4:1 f:\dwg\misc\mktg\mcx7-p-c-xx-st-ca3-mkt.slddrw notes: 1. represents a critical dimension. 2. center contact pushout force: 10 n [2.25 lb] min. 3. see sheet 3 for termination information. 4. note deleted. 5. product to be packaged per packaging standard co-hd-wi-3040-m. 6. rohs compliant. 7. component plating designations: -h: .000030" min. gold over .000050" min. nickel. -f: .000003" min. gold over .000050" min. nickel. -n: .000100" min. nickel. 8. assembly plating designations: -hn: (center contact)-h: (outer contact)-f: (remaining metal parts)-n: -h: (center contact)-h: (outer contact)-f: (remaining metal parts)-f: shell, ferrules: brass contact: brass dielectric: ptfe 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision f
3.90 .154 ref "b" "b" 9.00 ref .354 0.90 .035 ref 0.52 .020 ref 0.40 .016 ref scale 8:1 15.70 ref .618 10.70 ref .421 2.70 ref .106 (over knurl) 4.90 .193 ref 7.00 .276 ref 3.20 ref .126 section "b"-"b" sheet of mcx straight cable plug, rg179- 75 ohm by: mcx7-p-c-xx-st-ca3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 02/06/2008 3 2 sheet scale: 4:1 revision f f:\dwg\misc\mktg\mcx7-p-c-xx-st-ca3-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
2.0 ref .079 3.9 ref .154 9.1 ref .358 strip and tin inner conductor rg-179 cable 20.0 2.5 .79 .10 add heat shrink tube and ferrule mcx-fer-001-x hst-0.125-02-blk 0.10 gap max allowable .004 solder signal pin mcx7-p-c-x-st-ca3-pin c 2.70 .106 (min. flared id) flare shield add sub-mcx7-p-c-xx-st-ca3 sub-mcx7-p-c-xx-st-ca3 3.25 hex crimp .128 (across 2 faces) 0.25 gap max allowable .010 crimp ferrule (use rf crimp hand tool # cat-ht-126667-21 or equivalent) c c 0.6 gap max allowable .03 apply heat shrink tubing 0.52 .020 ref 0.30 0.00 + 0.15 .012 - .000 + .006 to center contact 2.85 ref .112 to insulator detail 'a' scale 8 : 1 c sheet of mcx straight cable plug, rg179- 75 ohm by: mcx7-p-c-xx-st-ca3 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 02/06/2008 3 3 sheet scale: 1.5:1 revision f f:\dwg\misc\mktg\mcx7-p-c-xx-st-ca3-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
